Cost of furnace replacement in Connecticut (CT)
A 100,000 BTU furnace installed
$5,500to $8,300
That is a standard 80% AFUE model, the federal minimum and what most replacements are. A 96% condensing furnace runs $6,600 to $9,800.
Is the efficient one worth it here?
Costs more
$1,300
Saves a year
$411
Pays back in
3.2 yrs
Connecticut burns enough gas over a winter for the efficiency to earn its premium back well inside the furnace's life. At $2.25 a therm and 5,800 heating degree days, the condensing model is the better buy.
Before you replace like for like
A furnace is not the only option. A heat pump does the same job using electricity, and in some states costs less to run — it depends on the gap between gas and electricity prices where you live, which is not the same everywhere.
Compare both in ConnecticutCommon questions
How much does it cost to replace a furnace in Connecticut?
Between about $5,500 and $8,300 installed for a standard 80% AFUE furnace, or $6,600 to $9,800 for a 96% condensing model. A 1,800 square foot home in Connecticut needs roughly 100,000 BTU of output.
Is a high-efficiency furnace worth it in Connecticut?
Yes. The condensing model costs about $1,300 more and saves roughly $411 a year on gas at Connecticut prices, so it repays itself in about 3.2 years — well inside the life of the furnace.
What size furnace do I need?
About 100,000 BTU for 1,800 square feet in Connecticut's climate — roughly 56 BTU per square foot, which reflects 5,800 heating degree days a year. Colder states need more output for the same house.
More for Connecticut
Everything in Connecticut
All five figures at once
Energy rates in Connecticut
What power and gas cost
Average electric bill in Connecticut
What households pay
Cost to run AC in Connecticut
Per hour and per year
Cost to heat a home in Connecticut
Gas vs heat pump
Solar payback in Connecticut
Whether panels pay off
Sizing from Connecticut's heating degree days for a 1,800 square foot home. Gas price from the US Energy Information Administration, 2026-05. Installed costs are a national estimate spread ±20% — ductwork, venting runs and your region move real quotes more than the furnace itself does. Get three.